• Facebook - Grey Circle
  • LinkedIn - Grey Circle
  • Google+ - Grey Circle

CONTACT US

EMAIL: sales@yellowlinecorp.com

Phone: (713) 234-0686

Solids Control Equipment

 

 

Solids Control Equipment exists in almost every liquid flow processing applications where there is a need to remove solids from liquid or remove liquid from solids, especially, in drilling fluids solids control, waste water treatment and dredging slurry applications. At Yellow Line Corp, we have extensive experience in the solid-liquid separation and offer a wide range of screeninghydrocyclonescentrifuge equipment to meet your slurry separation requirement.

 

  • Compact Design saves space

  • Easy operation and maintenance

  • Durable Structure and large treating capacity

  • Custom Design available to suit different application

  • Engineers available for commissioning and training

 

 

EQUIPMENT EFFICIENCY

 

  • Shale Shaker – Separation Particle Size: > 65μm removal

  • Desander – Separation Particle Size: > 40μm removal

  • Desilter – Separation Particle Size: > 20 microns removal

  • High Speed Decanter – Separation Particle Size: > 2μm removal

  • Middle Speed Decanter – Separation Particle Size: > 8μm removal for Barite Recovery of Weighted System”

  • Solids Control Equipment Catalog

 

 

Decenter Centrifuge

Shale Shaker

Poorboy Degasser

Mud Cleaner

Hydrocyclone Units

Vertical Cutting Dryer

Why Choose us?

We offer the complete line of solids control equipment for drilling mud cleaning and recycling. A rich experience of world-wide sales and operation allows us to make the equipment according to your local requirements from mechanical structure to electrical system.

Overview

In drilling equipment, making sure that every bit of mud, the drilling liquid that is used during the drilling process to lubricate the drills and cool down drilling equipment, is essential. With solids control equipment, any solids that are brought up to the surface during the boring process can be separated from the drilling liquid. By utilizing various types of solids control equipment, the mud can then be reintroduced back into the borehole allowing for efficient drilling and lower overall costs.

Shaker

A shale shaker is extremely important and is the equipment that separates the largest solids from any drilling liquid. With a shale shaker, shavings that come to the surface end up on a series of mesh shale shaker screens where they are constantly shaken so that the drilling liquid goes through the screen and solids do not.

Desander

The shale shaker can typically separate solids down to 75μm but most of the time this is not enough to truly remove any solids from drilling liquid. Once the shale shaker stage is over, the next piece of solids control equipment is the desander which can remove solids between 45 and 74μm.

Desilter

The desilter is similar to the desander and is another piece of solids control equipment that can remove very small particles from any liquid. Solids as small as 15μm can be separated using a proficient desilter. There are times when desanders and desilters can even be combined depending on the situation.

Degasser

During the process of removing solids from drilling liquid, air can become trapped in the liquid itself. A vacuum degasser is a type of solids control equipment that will remove any of the air within the liquid so that it can be reintroduced to the mud tank.

Mud Tank

Once liquid goes through all of the various equipment that sits on top of the mud tank, the drilling liquid can be sent back into the bore hole and operate almost as effectively as if it were pure drilling liquid in the first place.

Pumps and Handling
MORE THAN EQUIPMENT BUT SOLUTION

Oilfield Decanter Centrifuge for Drilling Mud Processing

Having effective solids control equipment is very important for any oilfield. Without having proper solids control, drills can encounter a variety of problems. When low gravity solids start to build up, the borehole can become [...]

Mud Tanks in Solids Control System

What is mud tank? A mud tank is an open-top container, typically made of steel, to store drilling fluid on a drilling rig. It is also called mud pit, because it used to be nothing [...]

Drilling Cuttings Disposal Method and System

During the drilling process, drills will send particles and drilling liquid (also known as mud) to the surface. These solid particles are known as cuttings and when they first arrive at the surface of your [...]